Power Connection Kit - List of Manufacturers, Suppliers, Companies and Products

Power Connection Kit Product List

1～9 item / All 9 items

Displayed results
Power Connection Kit "C-150-E"

Power Connection Kit "C-150-E"

Introducing the kit for straight connection of Reikem industrial heating cables and power cables.

The "C-150-E" is a kit for the straight connection of Raychem industrial heating cables: BTV, QTVR, XTV, KTV, and power cables. It can be installed under insulation materials that do not require heating treatment and is suitable for applications with a temperature range of -40°C to 215°C. Please use three-core twisted wire cables with an outer diameter of 7.8mm to 12.5mm. The power cable and heater leads are connected with butt crimp terminals. 【Features】 ■ Can be installed under insulation materials that do not require heating treatment ■ Usable for applications with a temperature range of -40°C to 215°C *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power Connection Kit "JB-82"

Power Connection Kit "JB-82"

Four input ports! Can be used for power connection, linear connection, and T-type connection of Reikem's self-regulating heating cable.

The "JB-82" is a connection kit for general locations. It can be used for power connections, linear connections, and T-type connections of Raychem's self-regulating heating cables. With four entry ports, it allows for the connection of up to four heating cables or one power supply line and up to three heating cables. For connections with heating cables, use C25-100 or C25-21. 【Specifications (Enclosure)】 ■ Protection rating: IP66 ■ Entry ports: 4M20/25 ■ Exposure temperature: -35℃ to +115℃ ■ Body: Glass fiber reinforced polycarbonate (gray) ■ Cover: Polycarbonate (gray) ■ Gasket cover: Made of polyurethane ■ Body weight: Approximately 450g *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power Connection Kit "JBU-100"

Power Connection Kit "JBU-100"

We provide rapid construction, safety, reliability, and maintenance-free solutions!

The "JBU-100" is designed to connect up to three Raychem industrial heating cables: BTV, QTVR, XTV, KTV, and VPL to a power source. The innovative WAGO cage clamp terminal block offers quick installation, safety, reliability, and maintenance-free operation. It can be used for power connections, straight connections, and T-type connections of Raychem self-regulating heating cables. 【Features】 - Provides quick installation, safety, reliability, and maintenance-free operation - Can be used for power connections, straight connections, and T-type connections of Raychem self-regulating heating cables - With four entry points, it allows for the connection of up to four heating cables or the connection of a power supply line and up to three heating cables *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power Connection Kit "C25-21"

Power Connection Kit "C25-21"

The Raychem heating cables are compatible with BTV, QTVR, XTV, KTV, and VPL.

The "C25-21" is a kit for connecting Raychem heating cables BTV, QTVR, XTV, KTV, and VPL to a junction box. This product maintains the electrical insulation of the heater's conductors and uses Raychem's heat shrink tubing for sealing the core part of the heater. Please note that the junction box requires either an M25 screw hole or a φ25 hole, and if using a φ25 hole, a lock nut is required. 【Features】 ■ Compatible heating cables: BTV, QTVR, XTV, KTV, VPL ■ Screw size: M25×1.5 (if there is no screw hole in the junction box, a φ25 hole is required) ■ Minimum operating ambient temperature: -55℃ ■ Maximum exposure temperature (ground part): 110℃ ■ Weight: 60g *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power Connection Kit 'C25-100'

Power Connection Kit 'C25-100'

This is an introduction to the kit for connecting the Raychem heating cable to the junction box.

The "C25-100" is a kit for connecting Raychem heating cables to a junction box. This product maintains the electrical insulation of the heater's conductors and the core seal does not require heat treatment, making installation easy. Please note that the junction box requires either an M25 screw hole or a φ25 hole, and if using a φ25 hole, a lock nut is necessary. 【Features】 ■ Compatible heating cables: BTV, QTVR, XTV, KTV, VPL ■ Screw size: M25×1.5 (if the junction box does not have a screw hole, a φ25 hole is required) ■ Minimum operating ambient temperature: -55℃ ■ Maximum exposure temperature (ground part): 110℃ ■ Weight: 70g *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power Connection Kit "JS-100-A"

Power Connection Kit "JS-100-A"

This is an introduction to a kit for connecting the power supply of a single Raychem self-regulating heating cable.

The "JS-100-A" is a kit for connecting the power supply of a single Raychem self-regulating heating cable. It combines a connection kit and an insulation entry kit, and the robust stand protects the heating cable, allowing for installation with insulation materials up to 100mm thick. It uses a new type of core seal boot, which does not require a heat gun or torch during installation. Therefore, there is no need to verify the use of heat sources or open flames. 【Features】 ■ The robust stand protects the heating cable ■ Installation is possible with insulation materials up to 100mm thick ■ Uses a new type of core seal boot ■ Does not require a heat gun or torch during installation ■ The sealing material inside the boot does not harden, making installation and maintenance easy *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Domestic explosion-proof system compatible power connection kit 'JBS-100'

Domestic explosion-proof system compatible power connection kit 'JBS-100'

Significantly reduces construction time compared to existing systems! Can install insulation materials up to 100mm thick.

This kit is a power connection kit specifically designed for Raychem self-regulating heating cables and Raychem power-limiting cables, applicable to domestic Class 1 and Class 2 hazardous locations or Class 1 and Class 2 hazardous areas. The JBS-100 combines a connection kit and an insulation entry kit, featuring a robust stand that protects the heating cable and can accommodate insulation thicknesses of up to 100mm. 【Features】 - The sealing material inside the boot does not harden, making installation and maintenance easy. - The innovative WAGO cage clamp terminal block provides quick installation, safety, reliability, and maintenance-free operation. - Compared to existing systems, this kit significantly reduces installation time. - It has two M25 entries, equipped with an earth plate inside the box and an earth stud outside the box. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power Connection Kit "JBS-100"

Power Connection Kit "JBS-100"

Insulation material with a thickness of up to 100mm can be installed! No heat gun or torch is required during installation.

The "JBS-100" is a power connection kit specifically designed for a single Raychem self-regulating heating cable and Raychem power-limiting cable. Additionally, it is a product that combines the connection kit and insulation entry kit. The robust stand protects the heating cable and can be installed with insulation up to 100mm thick. 【Features】 ■ The robust stand protects the heating cable ■ Can be installed with insulation up to 100mm thick ■ Uses a new type of core seal boot ■ No heat gun or torch is required during installation ■ The sealing material inside the boot does not harden, making installation and maintenance easy *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power Connection Kit for Domestic Explosion-Proof System 'JBM-100'

Power Connection Kit for Domestic Explosion-Proof System 'JBM-100'

Heaters can be connected up to three units! They are applicable to domestic Class 1 and Class 2 hazardous locations, as well as Category 1 and Category 2 hazardous areas.

This kit can be applied to domestic Class 1 and Class 2 hazardous locations or Category 1 and Category 2 hazardous areas, and it can connect up to three heaters. It is a power connection kit specifically for up to three Raychem self-regulating heating cables and Raychem power-limiting cables. Additionally, it combines the connection kit with an insulation entry kit, and the robust stand protects the heating cables, allowing installation with insulation materials up to 100mm thick. 【Features】 - Can connect up to three heaters - Applicable to domestic Class 1 and Class 2 hazardous locations and Category 1 and Category 2 hazardous areas - Power connection kit specifically for up to three Raychem self-regulating heating cables and Raychem power-limiting cables - Robust stand protects the heating cables - Can be installed with insulation materials up to 100mm thick *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.